"MAD SIDE FLARES ALLOY" — RYKER ALL MODELS (MADE IN USA / CUSTOM MACHINED / SHIPPING INCLUDED) (AGGRESSIVE SIDE EXTENSIONS FOR THE CAN-AM RYKER — ALUMINUM)
READY TO TAKE YOUR RYKER FROM CLEAN TO COMBAT-READY? THE MAD SIDE FLARES ALLOY ARE DESIGNED TO WIDEN YOUR MACHINE'S VISUAL STANCE AND COMPLETE THAT FULLY FLARED, GROUND-HUGGING LOOK — NOW FORGED IN METAL. THESE AREN'T JUST STYLE PIECES. THEY'RE ARMOR FOR THE URBAN JUNGLE.
WITH BOLD ANGULAR LINES AND A LOW-PROFILE EDGE, THESE SIDE FLARES PUNCH UP YOUR RYKER'S SILHOUETTE, FLOWING SEAMLESSLY INTO YOUR EXISTING BODYWORK WHILE ADDING THAT MADMAN LAYER OF AGGRESSION. CUT AND FORMED FROM .125" (3.2MM) 5052-H32 MARINE-GRADE ALUMINUM AND FINISHED IN A DURABLE POWDER COAT, THE ALLOY TRADES RUGGED PLASTIC FOR A HARDER, PREMIUM METAL EDGE. PAIR THEM WITH OUR FRONT SPLITTER, WINGLETS, OR WHEEL FLARES FOR A FULL-SYSTEM STREET FIGHTER LOOK.
AGGRESSIVE VISUAL EXPANSION EXTENDS YOUR RYKER'S PROFILE TO LOOK LOWER, WIDER, AND READY FOR WAR.
SEAMLESS INTEGRATION DESIGNED TO COMPLEMENT THE RYKER'S STOCK PANELS AND ALL MADMAN AERO PARTS.
FORMED ALUMINUM CONSTRUCTION .125" (3.2MM) 5052-H32 MARINE-GRADE ALUMINUM, CUSTOM MACHINED AND FORMED — CORROSION-RESISTANT, WEATHER-FACING, AND FINISHED IN A HARD POWDER COAT BUILT TO HOLD ITS LOOK.
STYLE THAT STICKS GIVES YOUR RYKER A MUSCLE-CAR ATTITUDE WITH MADMAN EDGE — BECAUSE STOCK JUST DOESN'T CUT IT.
STRAIGHTFORWARD MOUNTING HARDWARE-FRIENDLY AND RIDER-APPROVED. PROFESSIONAL INSTALLATION RECOMMENDED FOR BEST FIT AND FINISH.
THE MAD SIDE FLARES ALLOY DON'T WHISPER — THEY SHOUT. THEY DON'T ASK FOR ATTENTION — THEY DEMAND IT. COMPLETE THE LOOK. OWN THE ROAD. ONLY FROM MADMAN WRENCH WORKS.
THE MAD SIDE FLARES ALLOY ARE CUT AND FORMED FROM .125" (3.2MM) 5052-H32 ALUMINUM AND FINISHED IN A PROTECTIVE POWDER COAT. AS METAL COMPONENTS, EDGES AND MOUNTING POINTS SHOULD BE HANDLED AND INSTALLED WITH CARE. PROFESSIONAL INSTALLATION IS RECOMMENDED. THIS IS A DESIGN-DRIVEN STYLING COMPONENT INTENDED TO ENHANCE VISUAL STANCE AND ATTITUDE — IT IS NOT A GUARANTEED PERFORMANCE MODIFICATION AS RESULTS MAY VARY BY INSTALLATION, SETUP, AND RIDING CONDITIONS.
BY PURCHASING, INSTALLING, OR USING THIS PRODUCT, YOU ACKNOWLEDGE AND ACCEPT THAT YOU ASSUME ALL RISKS ASSOCIATED WITH ITS USE, INCLUDING ANY DAMAGE TO THE VEHICLE OR COMPONENTS. MADMAN WRENCH WORKS IS NOT LIABLE FOR ANY DAMAGE, INJURY, OR LOSS ARISING FROM INSTALLATION, MISUSE, OR OPERATION OF THIS PRODUCT. MADE-TO-ORDER — FITMENT VERIFICATION REQUIRED BEFORE INSTALLATION. ROAD LEGALITY VARIES BY LOCATION — THE CUSTOMER IS RESPONSIBLE FOR COMPLIANCE. ALL SALES ARE FINAL ON CUSTOM OR MADE-TO-ORDER ITEMS. FOR FULL DETAILS, PLEASE REFER TO OUR LEGAL NOTICE AND LIMITED WARRANTY & RETURNS POLICY.
2019 CAN-AM RYKER / RALLY EDITION
2020 CAN-AM RYKER / RALLY EDITION
2021 CAN-AM RYKER / RALLY EDITION
2022 CAN-AM RYKER / SPORT / RALLY EDITION
2023 CAN-AM RYKER / SPORT / RALLY EDITION
2024 CAN-AM RYKER / SPORT / RALLY EDITION
2025 CAN-AM RYKER / SPORT / RALLY EDITION
2026 CAN-AM RYKER / SPORT / RALLY EDITION
2027 CAN-AM RYKER / SPORT / RALLY EDITION
Q: HOW ARE THE MAD SIDE FLARES ALLOY DIFFERENT FROM THE ORIGINAL SIDE FLARES?
SAME AGGRESSIVE FLARED SILHOUETTE, DIFFERENT MATERIAL. THE ORIGINAL IS BUILT FROM OUTDOOR-GRADE HDPE; THE ALLOY IS CUT AND FORMED FROM .125" 5052-H32 ALUMINUM AND FINISHED IN A DURABLE POWDER COAT — SHARPER EDGE DEFINITION, A PREMIUM METAL FEEL, AND A HARD WEATHER-FACING FINISH.
Q: DO THEY FIT ALL RYKER MODELS?
YES. THE MAD SIDE FLARES ALLOY FIT 2019–2025 CAN-AM RYKER MODELS, INCLUDING RALLY EDITION (2019–2021) AND SPORT (2022–2027). CONFIRM YOUR EXACT MODEL YEAR AND TRIM BEFORE ORDERING.
Q: DO THEY COME AS A PAIR, AND IS HARDWARE INCLUDED?
SOLD AS A LEFT/RIGHT PAIR / MOUNTING HARDWARE INCLUDED, TEMPLATE FOR HOLES INCLUDED, INSTALL INSTRUCTIONS. PROFESSIONAL INSTALLATION IS RECOMMENDED, AND FITMENT VERIFICATION IS REQUIRED BEFORE INSTALLATION.
Q: WILL THE POWDER COAT HOLD UP OUTDOORS?
POWDER COAT IS A DURABLE, WEATHER-FACING FINISH DESIGNED TO HOLD COLOR AND CHARACTER THROUGH SUN AND SEASON. AS WITH ANY FINISHED METAL COMPONENT, CARE DURING HANDLING AND INSTALLATION HELPS PRESERVE THE FINISH OVER TIME. SAME AS ANODIZED COLORS
Q: CAN I RUN THESE WITH THE FULL MADMAN KIT?
YES. THE SIDE FLARES ARE DESIGNED TO INTEGRATE WITH THE FRONT SPLITTER, INTAKE CANARDS, AND WHEEL FLARES FOR A COMPLETE FULL-SYSTEM STREET FIGHTER BUILD.
COMPLETE THE LOOK AND OWN THE ROAD. THE MAD SIDE FLARES ALLOY ARE MADE TO ORDER — CONFIRM YOUR MODEL YEAR AND TRIM, CHOOSE YOUR FINISH, AND RESERVE YOURS.
"MAD SIDE FLARES ALLOY" — RYKER ALL MODELS (MADE IN USA / CUSTOM MACHINED / SHIPPING INCLUDED) (AGGRESSIVE SIDE EXTENSIONS FOR THE CAN-AM RYKER — ALUMINUM)
READY TO TAKE YOUR RYKER FROM CLEAN TO COMBAT-READY? THE MAD SIDE FLARES ALLOY ARE DESIGNED TO WIDEN YOUR MACHINE'S VISUAL STANCE AND COMPLETE THAT FULLY FLARED, GROUND-HUGGING LOOK — NOW FORGED IN METAL. THESE AREN'T JUST STYLE PIECES. THEY'RE ARMOR FOR THE URBAN JUNGLE.
WITH BOLD ANGULAR LINES AND A LOW-PROFILE EDGE, THESE SIDE FLARES PUNCH UP YOUR RYKER'S SILHOUETTE, FLOWING SEAMLESSLY INTO YOUR EXISTING BODYWORK WHILE ADDING THAT MADMAN LAYER OF AGGRESSION. CUT AND FORMED FROM .125" (3.2MM) 5052-H32 MARINE-GRADE ALUMINUM AND FINISHED IN A DURABLE POWDER COAT, THE ALLOY TRADES RUGGED PLASTIC FOR A HARDER, PREMIUM METAL EDGE. PAIR THEM WITH OUR FRONT SPLITTER, WINGLETS, OR WHEEL FLARES FOR A FULL-SYSTEM STREET FIGHTER LOOK.
AGGRESSIVE VISUAL EXPANSION EXTENDS YOUR RYKER'S PROFILE TO LOOK LOWER, WIDER, AND READY FOR WAR.
SEAMLESS INTEGRATION DESIGNED TO COMPLEMENT THE RYKER'S STOCK PANELS AND ALL MADMAN AERO PARTS.
FORMED ALUMINUM CONSTRUCTION .125" (3.2MM) 5052-H32 MARINE-GRADE ALUMINUM, CUSTOM MACHINED AND FORMED — CORROSION-RESISTANT, WEATHER-FACING, AND FINISHED IN A HARD POWDER COAT BUILT TO HOLD ITS LOOK.
STYLE THAT STICKS GIVES YOUR RYKER A MUSCLE-CAR ATTITUDE WITH MADMAN EDGE — BECAUSE STOCK JUST DOESN'T CUT IT.
STRAIGHTFORWARD MOUNTING HARDWARE-FRIENDLY AND RIDER-APPROVED. PROFESSIONAL INSTALLATION RECOMMENDED FOR BEST FIT AND FINISH.
THE MAD SIDE FLARES ALLOY DON'T WHISPER — THEY SHOUT. THEY DON'T ASK FOR ATTENTION — THEY DEMAND IT. COMPLETE THE LOOK. OWN THE ROAD. ONLY FROM MADMAN WRENCH WORKS.
THE MAD SIDE FLARES ALLOY ARE CUT AND FORMED FROM .125" (3.2MM) 5052-H32 ALUMINUM AND FINISHED IN A PROTECTIVE POWDER COAT. AS METAL COMPONENTS, EDGES AND MOUNTING POINTS SHOULD BE HANDLED AND INSTALLED WITH CARE. PROFESSIONAL INSTALLATION IS RECOMMENDED. THIS IS A DESIGN-DRIVEN STYLING COMPONENT INTENDED TO ENHANCE VISUAL STANCE AND ATTITUDE — IT IS NOT A GUARANTEED PERFORMANCE MODIFICATION AS RESULTS MAY VARY BY INSTALLATION, SETUP, AND RIDING CONDITIONS.
BY PURCHASING, INSTALLING, OR USING THIS PRODUCT, YOU ACKNOWLEDGE AND ACCEPT THAT YOU ASSUME ALL RISKS ASSOCIATED WITH ITS USE, INCLUDING ANY DAMAGE TO THE VEHICLE OR COMPONENTS. MADMAN WRENCH WORKS IS NOT LIABLE FOR ANY DAMAGE, INJURY, OR LOSS ARISING FROM INSTALLATION, MISUSE, OR OPERATION OF THIS PRODUCT. MADE-TO-ORDER — FITMENT VERIFICATION REQUIRED BEFORE INSTALLATION. ROAD LEGALITY VARIES BY LOCATION — THE CUSTOMER IS RESPONSIBLE FOR COMPLIANCE. ALL SALES ARE FINAL ON CUSTOM OR MADE-TO-ORDER ITEMS. FOR FULL DETAILS, PLEASE REFER TO OUR LEGAL NOTICE AND LIMITED WARRANTY & RETURNS POLICY.
2019 CAN-AM RYKER / RALLY EDITION
2020 CAN-AM RYKER / RALLY EDITION
2021 CAN-AM RYKER / RALLY EDITION
2022 CAN-AM RYKER / SPORT / RALLY EDITION
2023 CAN-AM RYKER / SPORT / RALLY EDITION
2024 CAN-AM RYKER / SPORT / RALLY EDITION
2025 CAN-AM RYKER / SPORT / RALLY EDITION
2026 CAN-AM RYKER / SPORT / RALLY EDITION
2027 CAN-AM RYKER / SPORT / RALLY EDITION
Q: HOW ARE THE MAD SIDE FLARES ALLOY DIFFERENT FROM THE ORIGINAL SIDE FLARES?
SAME AGGRESSIVE FLARED SILHOUETTE, DIFFERENT MATERIAL. THE ORIGINAL IS BUILT FROM OUTDOOR-GRADE HDPE; THE ALLOY IS CUT AND FORMED FROM .125" 5052-H32 ALUMINUM AND FINISHED IN A DURABLE POWDER COAT — SHARPER EDGE DEFINITION, A PREMIUM METAL FEEL, AND A HARD WEATHER-FACING FINISH.
Q: DO THEY FIT ALL RYKER MODELS?
YES. THE MAD SIDE FLARES ALLOY FIT 2019–2025 CAN-AM RYKER MODELS, INCLUDING RALLY EDITION (2019–2021) AND SPORT (2022–2027). CONFIRM YOUR EXACT MODEL YEAR AND TRIM BEFORE ORDERING.
Q: DO THEY COME AS A PAIR, AND IS HARDWARE INCLUDED?
SOLD AS A LEFT/RIGHT PAIR / MOUNTING HARDWARE INCLUDED, TEMPLATE FOR HOLES INCLUDED, INSTALL INSTRUCTIONS. PROFESSIONAL INSTALLATION IS RECOMMENDED, AND FITMENT VERIFICATION IS REQUIRED BEFORE INSTALLATION.
Q: WILL THE POWDER COAT HOLD UP OUTDOORS?
POWDER COAT IS A DURABLE, WEATHER-FACING FINISH DESIGNED TO HOLD COLOR AND CHARACTER THROUGH SUN AND SEASON. AS WITH ANY FINISHED METAL COMPONENT, CARE DURING HANDLING AND INSTALLATION HELPS PRESERVE THE FINISH OVER TIME. SAME AS ANODIZED COLORS
Q: CAN I RUN THESE WITH THE FULL MADMAN KIT?
YES. THE SIDE FLARES ARE DESIGNED TO INTEGRATE WITH THE FRONT SPLITTER, INTAKE CANARDS, AND WHEEL FLARES FOR A COMPLETE FULL-SYSTEM STREET FIGHTER BUILD.
COMPLETE THE LOOK AND OWN THE ROAD. THE MAD SIDE FLARES ALLOY ARE MADE TO ORDER — CONFIRM YOUR MODEL YEAR AND TRIM, CHOOSE YOUR FINISH, AND RESERVE YOURS.
