Metal (Anodized and Powder-Coated) variant of the Intake Canards.
Direct the Wind. Command the Front End.(Precision Winglets for the Can-Am Ryker — Aluminum)
The Intake Canards Alloy™ are more than aero accessories — they're functional fangs for your Ryker, now forged in metal. Sculpted to guide side airflow toward the Ryker's intake zones, these aggressive winglets are an aero-inspired design drawn with intent: to sharpen the front-side profile and give your machine a stance that reads before the engine turns over.
Cut and formed from .125" (3.2mm) 5052-H32 marine-grade aluminum and finished in a durable powder coat, the Alloy trades rugged plastic for a harder edge — corrosion-resistant, weather-facing, and built to hold its look ride after ride.
Airflow-Directed Design – Sculpted to guide side airflow toward the Ryker's intake zones. An aero-inspired shape, designed with airflow in mind. Not a guaranteed performance modification — results may vary by installation, setup, and riding conditions.
Aggressive Front-Side Profile – A bold winglet silhouette that reshapes the attitude of your front end and complements the Ryker's lines.
Formed Aluminum Construction – .125" (3.2mm) 5052-H32 marine-grade aluminum, precision-cut and formed for clean edge definition and a premium metal presence.
Built the MadMan Way – Durable powder-coat finish/Anodized over corrosion-resistant aluminum. Lightweight but rugged enough for real road warriors.
Designed, Not Adapted – Drawn specifically for the Ryker's proportions and informed by real automotive design discipline — the gap between generic and intentional is visible from across a parking lot.
The Intake Canards Alloy give your Ryker a sharper front-side read and a metal edge you can't ignore — styling drawn with intent.
The Intake Canards Alloy are cut and formed from .125" (3.2mm) 5052-H32 aluminum and finished in a protective powder coat. As metal components, edges and mounting points should be handled and installed with care. Professional installation is recommended. This is an aero-inspired design intended to enhance visual stance and attitude — it is not a guaranteed performance modification. Results may vary by installation, setup, and riding conditions.
By purchasing, installing, or using this product, you acknowledge and accept that you assume all risks associated with its use, including any damage to the vehicle or components. MadMan Wrench Works is not liable for any damage, injury, or loss arising from installation, misuse, or operation of this product. Made-to-order — fitment verification required before installation. Road legality varies by location — the customer is responsible for compliance. All sales may be final on custom or made-to-order items. For full details, please refer to our Legal Notice and Limited Warranty & Returns Policy.
2019 CAN-AM RYKER / RALLY EDITION
2020 CAN-AM RYKER / RALLY EDITION
2021 CAN-AM RYKER / RALLY EDITION
2022 CAN-AM RYKER / SPORT
2023 CAN-AM RYKER / SPORT
2024 CAN-AM RYKER / SPORT
2025 CAN-AM RYKER / SPORT
Available Finishes: [Add your powder-coat colorways here]
Q: How are the Intake Canards Alloy different from the original Intake Canards? A: Same aggressive winglet design, different material. The original is built from outdoor-grade HDPE; the Alloy is cut and formed from .125" 5052-H32 aluminum and finished in a durable powder coat — sharper edge definition, a premium metal feel, and a hard weather-facing finish.
Q: Do the canards actually improve performance or airflow to the engine? A: The Intake Canards Alloy are an aero-inspired design shaped to direct airflow toward the intake zones and sharpen the front-side profile. They are a styling-forward, design-driven piece — not a guaranteed performance modification as the results may vary by installation, setup, and riding conditions.
Q: How do they install, and do they come as a pair? A: The canards are designed for the Ryker's front-side fairings. Professional installation is recommended, and fitment verification is required before installation. Come as a pair for each side of the front end of the Ryker with a template for hole placement, instructional guide and included hardware.
Q: Will the powder coat hold up outdoors? A: Powder coat is a durable, weather-facing finish designed to hold color and character through sun and season. As with any finished metal component, care during handling and installation helps preserve the finish over time. Same as Anodized process depending on your choice.
Q: Will these fit my Ryker? A: The Intake Canards Alloy fit 2019–2025 Can-Am Ryker models, including Rally Edition (2019–2021) and Sport (2022–2025). Confirm your exact model year and trim before ordering.
Give your front end a metal edge. The Intake Canards Alloy are made to order — confirm your model year and trim, choose your finish, and reserve yours.
Metal (Anodized and Powder-Coated) variant of the Intake Canards.
Direct the Wind. Command the Front End.(Precision Winglets for the Can-Am Ryker — Aluminum)
The Intake Canards Alloy™ are more than aero accessories — they're functional fangs for your Ryker, now forged in metal. Sculpted to guide side airflow toward the Ryker's intake zones, these aggressive winglets are an aero-inspired design drawn with intent: to sharpen the front-side profile and give your machine a stance that reads before the engine turns over.
Cut and formed from .125" (3.2mm) 5052-H32 marine-grade aluminum and finished in a durable powder coat, the Alloy trades rugged plastic for a harder edge — corrosion-resistant, weather-facing, and built to hold its look ride after ride.
Airflow-Directed Design – Sculpted to guide side airflow toward the Ryker's intake zones. An aero-inspired shape, designed with airflow in mind. Not a guaranteed performance modification — results may vary by installation, setup, and riding conditions.
Aggressive Front-Side Profile – A bold winglet silhouette that reshapes the attitude of your front end and complements the Ryker's lines.
Formed Aluminum Construction – .125" (3.2mm) 5052-H32 marine-grade aluminum, precision-cut and formed for clean edge definition and a premium metal presence.
Built the MadMan Way – Durable powder-coat finish/Anodized over corrosion-resistant aluminum. Lightweight but rugged enough for real road warriors.
Designed, Not Adapted – Drawn specifically for the Ryker's proportions and informed by real automotive design discipline — the gap between generic and intentional is visible from across a parking lot.
The Intake Canards Alloy give your Ryker a sharper front-side read and a metal edge you can't ignore — styling drawn with intent.
The Intake Canards Alloy are cut and formed from .125" (3.2mm) 5052-H32 aluminum and finished in a protective powder coat. As metal components, edges and mounting points should be handled and installed with care. Professional installation is recommended. This is an aero-inspired design intended to enhance visual stance and attitude — it is not a guaranteed performance modification. Results may vary by installation, setup, and riding conditions.
By purchasing, installing, or using this product, you acknowledge and accept that you assume all risks associated with its use, including any damage to the vehicle or components. MadMan Wrench Works is not liable for any damage, injury, or loss arising from installation, misuse, or operation of this product. Made-to-order — fitment verification required before installation. Road legality varies by location — the customer is responsible for compliance. All sales may be final on custom or made-to-order items. For full details, please refer to our Legal Notice and Limited Warranty & Returns Policy.
2019 CAN-AM RYKER / RALLY EDITION
2020 CAN-AM RYKER / RALLY EDITION
2021 CAN-AM RYKER / RALLY EDITION
2022 CAN-AM RYKER / SPORT
2023 CAN-AM RYKER / SPORT
2024 CAN-AM RYKER / SPORT
2025 CAN-AM RYKER / SPORT
Available Finishes: [Add your powder-coat colorways here]
Q: How are the Intake Canards Alloy different from the original Intake Canards? A: Same aggressive winglet design, different material. The original is built from outdoor-grade HDPE; the Alloy is cut and formed from .125" 5052-H32 aluminum and finished in a durable powder coat — sharper edge definition, a premium metal feel, and a hard weather-facing finish.
Q: Do the canards actually improve performance or airflow to the engine? A: The Intake Canards Alloy are an aero-inspired design shaped to direct airflow toward the intake zones and sharpen the front-side profile. They are a styling-forward, design-driven piece — not a guaranteed performance modification as the results may vary by installation, setup, and riding conditions.
Q: How do they install, and do they come as a pair? A: The canards are designed for the Ryker's front-side fairings. Professional installation is recommended, and fitment verification is required before installation. Come as a pair for each side of the front end of the Ryker with a template for hole placement, instructional guide and included hardware.
Q: Will the powder coat hold up outdoors? A: Powder coat is a durable, weather-facing finish designed to hold color and character through sun and season. As with any finished metal component, care during handling and installation helps preserve the finish over time. Same as Anodized process depending on your choice.
Q: Will these fit my Ryker? A: The Intake Canards Alloy fit 2019–2025 Can-Am Ryker models, including Rally Edition (2019–2021) and Sport (2022–2025). Confirm your exact model year and trim before ordering.
Give your front end a metal edge. The Intake Canards Alloy are made to order — confirm your model year and trim, choose your finish, and reserve yours.
