Skip to Content

Home

About

Contact

Store

Home

About

Contact

Store

CUSTOMER GALLERY

Create. Ride. Inspire.

SHOP the MADDNESS

"Velocity Vane" Front Splitter - Ryker All Models

$350.00

Velocity Vane — Performance with Presence

The Velocity Vane isn’t just a splitter — it’s a declaration. Sculpted for the Can-Am Ryker, it cuts through air with purpose, creating steadier control, sharper handling, and that unmistakable MadMan attitude at every turn.

Crafted from premium outdoor-grade HDPE, it’s built to resist impact, UV fade, and the chaos of real roads — performance that holds its edge as fiercely as you do.

Because this isn’t only about aerodynamics. It’s about identity. Every angle, every line speaks your language — bold, unapologetic, and impossible to ignore.

Why Riders Choose the Velocity Vane:

Engineered Airflow: Reduces turbulence and increases front-end stability.
Built to Last: Durable, fade-resistant, and weather-tough polymer construction.
Aggressive Aesthetic: A design that transforms your Ryker into pure attitude.
MadMan Signature: Where function meets fearless expression.

RIDE MODE:

Sport Ride Mode
This setup runs a 2-inch extension for a clean, balanced look with real aerodynamic benefits. It smooths airflow, reduces lift and vibration, and boosts stability—perfect for everyday riding, weekend touring, or anyone wanting a sportier feel without going full race mode.
AGGRESSIVE RIDE MODE
This setup extends the splitter out to approximately 4 inches for max performance. It’s built for riders who push limits—delivering more front-end grip, better high-speed stability, and sharper handling. Ideal for aggressive street riding or track-style performance where aerodynamics matter most.
This configuration is intended primarily for on track-style use. Daily street riding with this setup requires extra caution around steep approach angles, driveways, ramps, and speed bumps to avoid contact or damage.
Note: due to the extended overhang and increased downforce, splitter rods are required for proper support. If not using rods, additional custom mounting solutions may be necessary.
By purchasing, installing, or using this setup, you acknowledge and accept that you assume all risks associated with its use, including any damage to the vehicle or components. Madman wrench works is not liable for any damage, injury, or loss arising from installation, misuse, or operation of this product. For full details, please refer to our legal notice and limited warranty & returns policy.

**DOES NOT FIT THE 2022+ RALLY MODELS

CAN-AM RYKER FITMENT GUIDE:YES!

2019 CAN-AM RYKER / RALLY EDITION

2020 CAN-AM RYKER / RALLY EDITION

2021 CAN-AM RYKER / RALLY EDITION

2022 CAN-AM RYKER / SPORT

2023 CAN-AM RYKER / SPORT

2024 CAN-AM RYKER / SPORT

2025 CAN-AM RYKER / SPORT

Ryker:

Ride Mode:

Color:

"PHANTOM BLADE" FRONT SPLITTER — MADGLASS — RYKER ALL MODELS

$365.00

PHANTOM VANE

THE PHANTOM VANE ISN'T JUST A SPLITTER — IT'S AN ILLUSION WITH ATTITUDE. SCULPTED IN AN ALL-NEW SHAPE EXCLUSIVE TO THE MADGLASS LINE, IT CUTS A SHARPER FRONT-END SILHOUETTE THAN ANYTHING ELSE IN THE LINEUP. BUILT AS A 3-PIECE HYBRID CONSTRUCTION — MADGLASS CAST ACRYLIC ON BOTH OUTER PANELS WITH A REINFORCED OUTDOOR-GRADE HDPE CENTER SECTION — IT'S DESIGNED TO LOOK LIKE NOTHING ELSE ON THE ROAD WHILE HOLDING ITS SHAPE WHERE IT MATTERS MOST.

THE OUTER MADGLASS PANELS CATCH AND SHIFT WITH LIGHT — SUNLIGHT, HEADLIGHTS, GARAGE LED, ALL OF IT — WHILE THE HDPE CENTER SECTION ANCHORS THE DESIGN WITH THE SAME RUGGED, WEATHER-TOUGH MATERIAL USED ACROSS THE REST OF THE MADMAN LINEUP.

BECAUSE THIS ISN'T ONLY ABOUT SHAPE. IT'S ABOUT IDENTITY. EVERY ANGLE, EVERY REFLECTION SPEAKS YOUR LANGUAGE — BOLD, UNAPOLOGETIC, AND IMPOSSIBLE TO IGNORE.

WHY RIDERS CHOOSE THE PHANTOM VANE:

3-PIECE HYBRID CONSTRUCTION — MadGlass cast acrylic outer panels paired with a reinforced HDPE center section — the first splitter in the lineup to combine both materials in one design.

ALL-NEW SCULPTED GEOMETRY — A shape exclusive to the MadGlass line, distinct from the original Velocity Vane silhouette.

LIGHT-REACTIVE OUTER PANELS — MadGlass construction on both outer sections catches and reflects light, changing character across sunlight, headlights, and garage lighting.

REINFORCED CENTER SECTION — The high-stress center zone is built from the same outdoor-grade HDPE used across the MadMan lineup, adding structural consistency to the design.

FLAGSHIP-LEVEL PRESENCE — MadMan's most visually distinct splitter to date, built for riders who want their front end to be the first thing people notice.

MADMAN SIGNATURE — Where design meets fearless expression.

RIDE MODE

SPORT RIDE MODE
This setup runs a 2-inch extension for a clean, balanced front-end look designed with airflow in mind. Intended for everyday riding, weekend touring, or riders wanting a sharper visual stance without maximum extension.

AGGRESSIVE RIDE MODE
This setup extends the splitter out to approximately 4 inches for maximum visual presence and the boldest front-end stance in the lineup. Intended primarily for show-focused and track-style display use.

MATERIAL & CONSTRUCTION NOTE

THIS PRODUCT IS BUILT AS A 3-PIECE HYBRID: THE TWO OUTER PANELS ARE MACHINED FROM MADGLASS CAST ACRYLIC, WHILE THE CENTER SECTION IS CONSTRUCTED FROM OUTDOOR-GRADE HDPE. THE OUTER MADGLASS PANELS HAVE LOWER IMPACT RESISTANCE THAN HDPE AND ARE BEST SUITED FOR SPORT RIDE MODE, DISPLAY, AND SHOW USE. THE HDPE CENTER SECTION IS DESIGNED FOR STRUCTURAL CONSISTENCY BUT DOES NOT ELIMINATE THE REDUCED IMPACT RESISTANCE OF THE OUTER ACRYLIC PANELS. AGGRESSIVE STREET RIDING, OFF-ROAD USE, OR HIGH-IMPACT CONDITIONS ARE NOT RECOMMENDED FOR THIS PRODUCT. RESULTS MAY VARY BY INSTALLATION, SETUP, AND RIDING CONDITIONS.

NOTE: DUE TO THE EXTENDED OVERHANG IN AGGRESSIVE RIDE MODE, SPLITTER RODS ARE REQUIRED FOR PROPER SUPPORT. IF NOT USING RODS, ADDITIONAL CUSTOM MOUNTING SOLUTIONS MAY BE NECESSARY. GIVEN THE HYBRID CONSTRUCTION, PROPER SUPPORT IS ESPECIALLY IMPORTANT AT THE PANEL-TO-CENTER JOINTS.

BY PURCHASING, INSTALLING, OR USING THIS PRODUCT, YOU ACKNOWLEDGE AND ACCEPT THAT YOU ASSUME ALL RISKS ASSOCIATED WITH ITS USE, INCLUDING ANY DAMAGE TO THE VEHICLE OR COMPONENTS. MADMAN WRENCH WORKS IS NOT LIABLE FOR ANY DAMAGE, INJURY, OR LOSS ARISING FROM INSTALLATION, MISUSE, OR OPERATION OF THIS PRODUCT. FITMENT VERIFICATION REQUIRED BEFORE INSTALLATION. FOR FULL DETAILS, PLEASE REFER TO OUR LEGAL NOTICE AND LIMITED WARRANTY & RETURNS POLICY.

FITS RALLY MODELS

CAN-AM RYKER FITMENT GUIDE: YES!

2019 CAN-AM RYKER / RALLY EDITION
2020 CAN-AM RYKER / RALLY EDITION
2021 CAN-AM RYKER / RALLY EDITION
2022 CAN-AM RYKER / SPORT / RALLY EDITION
2023 CAN-AM RYKER / SPORT / RALLY EDITION
2024 CAN-AM RYKER / SPORT / RALLY EDITION
2025 CAN-AM RYKER / SPORT / RALLY EDITION

FAQ

Q: How is the Phantom Vane different from the Velocity Vane Splitter?
A: The Phantom Vane features an all-new sculpted shape and a 3-piece hybrid construction — MadGlass cast acrylic outer panels with an HDPE center section — versus the Velocity Vane's full HDPE build. It's a distinct flagship product, not a material swap of the original.

Q: Why combine two materials instead of using one throughout?
A: The hybrid build lets us put MadGlass exactly where it has the most visual impact — the outer panels — while keeping the structural center section in the same rugged HDPE used across the rest of the MadMan lineup. It's the best of both: standout looks with a reinforced core.

Q: Can I run Aggressive Ride Mode on the street?
A: Aggressive Ride Mode is intended primarily for show-focused and track-style display use. Daily street riding in this configuration requires extra caution around steep approach angles, driveways, ramps, and speed bumps.

Q: Do I need splitter rods for this product?
A: Yes, for non-Rally models in Aggressive Ride Mode. Splitter rods are required for proper support due to the extended overhang, and are especially important given the hybrid panel construction. If not using rods, additional custom mounting solutions may be necessary.

Q: Will this fit my 2022+ Rally model?
A: YES! the Phantom Vane does fit 2022+ Rally models. Please confirm your exact model year and trim before ordering.

Color Inner:

Color Outer:

"INTAKE CANARDS — MADGLASS" - RYKER ALL MODELS

$235.00

"INTAKE CANARDS — MADGLASS" – DIRECT THE AIR. SHAPE THE LIGHT.
(PRECISION WINGLETS FOR THE CAN-AM RYKER — CAST ACRYLIC EDITION)

THE INTAKE CANARDS™ — MADGLASS EDITION ARE MORE THAN JUST AERO-INSPIRED ACCESSORIES—THEY'RE FUNCTIONAL FANGS FOR YOUR RYKER, NOW CUT FROM PREMIUM CAST ACRYLIC. DESIGNED WITH AIRFLOW IN MIND, THESE AGGRESSIVE WINGLETS SHARPEN YOUR RYKER'S FRONT-SIDE PROFILE WHILE CATCHING SUNLIGHT, HEADLIGHTS, AND GARAGE LIGHTING IN WAYS STANDARD MATERIAL NEVER COULD.

CRAFTED FROM MADGLASS CAST ACRYLIC, THEY'RE BUILT FOR RIDERS WHO WANT MAXIMUM VISUAL IMPACT — DESIGNED FOR SPORT RIDE MODE AND SHOW-FOCUSED BUILDS.

WHY CHOOSE INTAKE CANARDS — MADGLASS:

BOLD FRONT-SIDE PROFILE – ADDS AN AGGRESSIVE, ATTENTION-DEMANDING WINGLET SILHOUETTE DESIGNED WITH AIRFLOW IN MIND.

LIGHT-REACTIVE MADGLASS FINISH – CAST ACRYLIC CONSTRUCTION CATCHES AND REFLECTS LIGHT FOR A LOOK THAT CHANGES WITH EVERY RIDE, EVERY ANGLE, EVERY TIME OF DAY.

AERO-INSPIRED DESIGN – SHAPED TO COMPLEMENT AIRFLOW ALONG THE RYKER'S FRONT-SIDE ZONES AS PART OF A COHESIVE VISUAL SYSTEM.

AGGRESSIVE, PURPOSEFUL AESTHETIC – A BOLD PROFILE THAT COMPLEMENTS THE RYKER'S LINES AND SETS YOUR RIDE APART FROM ANYTHING ELSE ON THE ROAD.

INTAKE CANARDS — MADGLASS GIVE YOUR RYKER THE EDGE IT WAS MISSING—STYLING YOU CAN'T IGNORE AND A FINISH NO ONE ELSE IS RUNNING.

MADGLASS MATERIAL NOTE:
THIS PRODUCT IS MACHINED FROM CAST ACRYLIC, NOT OUTDOOR-GRADE HDPE. ACRYLIC IS RECOMMENDED FOR DISPLAY, AND SHOW USE — NOT FOR HIGH-IMPACT, OFF-ROAD.

NOTE: BY PURCHASING, INSTALLING, OR USING THIS PRODUCT, YOU ACKNOWLEDGE AND ACCEPT THAT YOU ASSUME ALL RISKS ASSOCIATED WITH ITS USE, INCLUDING ANY DAMAGE TO THE VEHICLE OR COMPONENTS. MADMAN WRENCH WORKS IS NOT LIABLE FOR ANY DAMAGE, INJURY, OR LOSS ARISING FROM INSTALLATION, MISUSE, OR OPERATION OF THIS PRODUCT. FITMENT VERIFICATION REQUIRED BEFORE INSTALLATION. FOR FULL DETAILS, PLEASE REFER TO OUR LEGAL NOTICE AND LIMITED WARRANTY & RETURNS POLICY.

CAN-AM RYKER FITMENT GUIDE: YES!
2019 CAN-AM RYKER / RALLY EDITION
2020 CAN-AM RYKER / RALLY EDITION
2021 CAN-AM RYKER / RALLY EDITION
2022 CAN-AM RYKER / SPORT
2023 CAN-AM RYKER / SPORT
2024 CAN-AM RYKER / SPORT
2025 CAN-AM RYKER / SPORT

Color:

"Mad Side Flares" - Ryker All Models

$230.00

(Made in USA / Custom Machined / Shipping Included)

(Aggressive Side Extensions for the Can-Am Ryker)

Ready to take your Ryker from clean to combat-ready? The MadMan Side Flares are designed to widen your machine’s visual stance and complete that fully flared, ground-hugging look. These aren’t just style pieces—they’re armor for the urban jungle.

With bold angular lines and a low-profile edge, these side flares punch up your Ryker’s silhouette, flowing seamlessly into your existing bodywork while adding that MadMan layer of aggression. Pair them with our front splitter, winglets, or wheel flares for a full-system street fighter look.

Why Riders Choose MadMan Side Flares:

Aggressive Visual Expansion
Extends your Ryker’s profile to look lower, wider, and ready for war.

Seamless Integration
Designed to complement the Ryker’s stock panels and all MadMan aero parts.

Durable HDPE Construction
Same rugged, outdoor-grade polymer we use across the line—fade-resistant, impact-tough, and built to take a beating.

Style That Sticks
Gives your Ryker a muscle-car attitude with MadMan edge—because stock just doesn’t cut it.

Easy Install
Hardware-friendly and rider-approved. Get back on the road with no nonsense.

The MadMan Side Flares don’t whisper—they shout.
They don’t ask for attention—they demand it.

Complete the look. Own the road.
Only from MadMan Wrench Works.

Note:By purchasing, installing, or using this product, you acknowledge and accept that you assume all risks associated with its use, including any damage to the vehicle or components. Madman wrench works is not liable for any damage, injury, or loss arising from installation, misuse, or operation of this product. For full details, please refer to our legal notice and limited warranty & returns policy.

CAN-AM RYKER FITMENT GUIDE:YES!

2019 CAN-AM RYKER / RALLY EDITION

2020 CAN-AM RYKER / RALLY EDITION

2021 CAN-AM RYKER / RALLY EDITION

2022 CAN-AM RYKER / SPORT

2023 CAN-AM RYKER / SPORT

2024 CAN-AM RYKER / SPORT

2025 CAN-AM RYKER / SPORT

Color:

Mad-Man Wrench Works Is proudly located in Detroit, MI

LEGAL NOTICE:

EACH MADMAN WRENCH WORKS PRODUCT IS MANUFACTURED TO ORDER AND IS CONSIDERED A CUSTOM, MADE-TO-SPEC COMPONENT. ACCORDINGLY, ALL SALES ARE FINAL AND NO REFUNDS OR CANCELLATIONS ARE ACCEPTED ONCE PRODUCTION BEGINS, EXCEPT AS REQUIRED BY LAW.

BY PURCHASING OR INSTALLING MADMAN WRENCH WORKS PRODUCTS, YOU ACKNOWLEDGE THAT AFTERMARKET PARTS MAY ALTER VEHICLE DYNAMICS AND THAT YOU VOLUNTARILY ASSUME ALL RISKS ASSOCIATED WITH INSTALLATION AND OPERATION. YOU AGREE TO FOLLOW ALL PUBLISHED INSTALLATION GUIDES, TORQUE SPECIFICATIONS, AND INSPECTION INTERVALS, AND TO ENSURE COMPLIANCE WITH ALL APPLICABLE EQUIPMENT, LIGHTING, AND EMISSIONS LAWS IN YOUR JURISDICTION.

MADMAN WRENCH WORKS DISCLAIMS, TO THE FULLEST EXTENT PERMITTED BY LAW, ALL LIABILITY FOR ANY AND ALL DAMAGES, INJURIES, OR LOSSES ARISING FROM INSTALLATION, MISUSE, OR OPERATION OF ITS PRODUCTS. NO WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), ARE PROVIDED OTHER THAN THOSE WHICH CANNOT BE EXCLUDED UNDER APPLICABLE LAW.

FULL Limited Warranty & Returns Policy HERE.

Learn more

CUSTOMER GALLERY

SHOP the MADDNESS

Velocity Vane — Performance with Presence

RIDE MODE:

**DOES NOT FIT THE 2022+ RALLY MODELS

WHY RIDERS CHOOSE THE PHANTOM VANE:

RIDE MODE

MATERIAL & CONSTRUCTION NOTE

FITS RALLY MODELS

CAN-AM RYKER FITMENT GUIDE: YES!

(Made in USA / Custom Machined / Shipping Included)

Why Riders Choose MadMan Side Flares:

(Made in USA / Custom Machined / Shipping Included)